Aluminum ion-containing polyimide adhesives

A meta-oriented aromatic diamine is reacted with an aromatic dianhydride and an aluminum compound in the presence of a water or lower alkanol miscible ether solvent to produce an intermediate polyamic acid. The polyamic acid is then converted to the thermally stable, metal ion-filled polyimide by heating in the temperature range of 300 C to produce a flexible, high temperature adhesive

Do lemurs know when they could be wrong? An investigation of information seeking in three species of lemur (<i>Lemur catta, Eulemur rubriventer, </i>and<i> Varecia variegata</i>)

Sixteen lemurs, including representatives from three species (Lemur catta, Eulemur rubriventer, Varecia variegata), were presented with a food seeking task where information about the rewards location, in one of two plastic tubes, was either known or not known. We evaluated whether lemurs would first look into the tube prior to making a choice. This information-seeking task aimed to assess whether subjects would display memory awareness, seeking additional information when they became aware they lacked knowledge of the rewards location. We predicted lemurs would be more likely to look into the tube when they had insufficient knowledge about the rewards position. Lemurs successfully gained the reward on most trials. However, they looked on the majority of trials regardless of whether they had all the necessary information to make a correct choice. The minimal cost to looking may have resulted in checking behaviour both to confirm what they already knew and to gain knowledge they did not have. When the cost of looking increased (elevating end of tube requiring additional energy expenditure to look inside - Experiment 2), lemurs still looked into tubes on both seen and unseen trials; however, the frequency of looking increased when opaque tubes were used (where they could not see the rewards location after baiting). This could suggest they checked more when they were less sure of their knowledge state

Mechanical and spectroscopic properties of metal-containing polyimides

The incorporation of specific metal ions into polyimides is described. Detailed studies have included various compounds of copper, lithium, and palladium as dopants. Addition of the metal during polymerization or after formation of the polyamic acid precedes the thermal imidization step. With many dianhydride-diamine-dopant combinations high quality variously colored films are produced. Many metal doped films exhibit (1) improved high temperature adhesive properties, (2) increased electrical conductivity, (3) excellent thermal stability, (4) improved acid/base resistance, (5) increased modulus in flexible films and (6) excellent high temperature tensile strength. X-ray photo-electron spectroscopic study of these films suggests that many of the additives undergo chemical modification during thermal imidization. Palladium dopants appear to be partially reduced to the metallic state, while lithium and copper dopants are probably converted to their oxides. Ion etching experiments with Auger electron spectroscopy monitoring are discussed

A constitutive model for the forces of a magnetic bearing including eddy currents

A multiple magnet bearing can be developed from N individual electromagnets. The constitutive relationships for a single magnet in such a bearing is presented. Analytical expressions are developed for a magnet with poles arranged circumferencially. Maxwell's field equations are used so the model easily includes the effects of induced eddy currents due to the rotation of the journal. Eddy currents must be included in any dynamic model because they are the only speed dependent parameter and may lead to a critical speed for the bearing. The model is applicable to bearings using attraction or repulsion

The interest rate sensitivity of Texas industry

A key factor in forecasting a region's growth is anticipating how a region will respond to changes in national policy. One important way national policy affects a region is through real interest rates. Forecasting regional growth, therefore, requires good estimates of the interest rate sensitivity of regional industries. In this study, Lori Taylor and Mine Yucel use vector autoregression analysis to examine the relationship between changes in real short-term interest rates and changes in Texas industry employment. They find that while a few industries are moderately sensitive to interest rate movements, most Texas industries are insensitive to changes in real interest rates. Moreover, they find that Texas total nonagricultural employment is insensitive to changes in real interest rates. As such, their analysis suggests that real interest rate movements influence the composition of Texas employment rather than its level.Interest rates ; Texas

Nonlinear dynamics of attractive magnetic bearings

The nonlinear dynamics of a ferromagnetic shaft suspended by the force of attraction of 1, 2, or 4 independent electromagnets is presented. Each model includes a state variable feedback controller which has been designed using the pole placement method. The constitutive relationships for the magnets are derived analytically from magnetic circuit theory, and the effects of induced eddy currents due to the rotation of the journal are included using Maxwell's field relations. A rotor suspended by four electro-magnets with closed loop feedback is shown to have nine equilibrium points within the bearing clearance space. As the rotor spin speed increases, the system is shown to pass through a Hopf bifurcation (a flutter instability). Using center manifold theory, this bifurcation can be shown to be of the subcritical type, indicating an unstable limit cycle below the critical speed. The bearing is very sensitive to initial conditions, and the equilibrium position is easily upset by transient excitation. The results are confirmed by numerical simulation

The policy sensitivity of industries and regions

Regional economics ; Monetary policy

Planetary biology and microbial ecology. Biochemistry of carbon and early life

Experiments made with cyanobacteria, phototrophic bacteria, and methanogenic bacteria are detailed. Significant carbon isotope fractionation data is included. Taken from well documented extant microbial communities, this data provides a basis of comparison for isotope fractionation values measured in Archean and Proterozoic (preCambrian) rocks. Media, methods, and techniques used to acquire data are also described